Hot Runner Temperature Controller

Approx. Rs 5,500 / PieceGet Latest Price

Elmec Speciality, Hot Runner Controllers are efficient and economical. Our Multi zone Hot runner Controllers are manufacture by assembling single temperature control modules . Thyristor controlled outputs to control Hot runner Heaters & Manifold Heaters are available.

SoFt

Press SET and MODE key together for 2 seconds, top line displays "SoFt", lower line displays "ON" or "oFF", press up or down key to change status.

When soft start status is on the temperature is lower than 93 o C  (199.4 F), soft start heating is activated. 

The power is limited to 10% of the nominal power for duration of 60 seconds, then add 5% each time.

Features

• Advanced P I D Control algorithm
• Maximum output power per zone : 3600 watts
• Supply Volts : 230v / 415v - 3 Phase
• Dual Display: Set point and actual temperature
• Thermocouple input : Universal Type
• Temperature display : oC (or) oF selectable
• Output : SSR / Thyristor

Function

• Temperature control mode: Adjust with multiple algorithms
• Protection function against short circuit / open circuit; alarm in case of thermocouple failure
• Thermocouple sensor type J and type K are interchangeable
• Soft-start avoids current leakage arising from moisture.
• Automatic and manual heating are available
• Voltage: AC185V-245V,50/60HZ
• Temperature precision: 0.1 
• Temperature resolution: 0.1 
• Temperature stability: ±0.5  (ambient temperature: -10~50 )
• Control temperature range: 50 ??? ~ 550 
• Watts: 16A, 100W~3600W